The main simulation parameters are resumed in this section, such as the information about the units, materials and observation points/directions.
Regarding the Units, the default units (meters) are appropriate for the current example, as it is the magnitude of the primitives considered. Every Units would be similarly valid for this example, but note that the axis and reference plane sizes should be scaled to the selected units. In case of changing the current Units, remember to click on YES button to the message that asks you for scaling the geometry.
Click on Simulation – Parameters to open the Simulation panel. The Initial frequency is set to 15 GHz. The simulation type is set as Coupling and the Output Ray-Tracing option is selected, so the coupling and ray tracing results will be available after the simulation. Also 3 bounces have been set, and both Diffracted and Creeping effects are selected.
No materials are required for this example, as both the box and the cylinders are full metallic structures.