This menu lets the user modify the settings for the RCS radar being used in this simulation, as well as other parameters related to the plane wave. To enter RCS settings, go to RCS > Parameters.
When selecting the menu, the following window will appear:
RCS parameters panel
The following settings are available:
- RCS Type: the RCS can either be monostatic or bistatic depending on whether the radar transmitter and the radar receiver are co-located or not.
- ETheta and EPhi: these parameters define the polarization wave for the plane wave.
- Tx-Rx angle: the user is able to define this value when the RCS is set to monostatic.
- Angle of indicence: the user is able to define this value when the RCS is set to bistatic.