CHAFF 6.2.9

15.5. Example 5

In this example, we are going to calculate the monostatic RCS of three spherical chaffs with a frequency sweep (17 samples from 2 GHz to 6 GHz) using MoM (Method of Moments).

Step 1

First, start newFASANT.

Step 2

Select “File → New” (or, alternatively, press Ctrl+N), and select Chaff from the list of modules by clicking in the following button:

Chaff module button

Step 3

Select “Chaff → Spherical Cloud → Dipole”, and enter the same parameters as in the figure:

Spherical Chaff → Dipole menu option

Chaff Parameters and Visualization

Step 4

Repeat the previous step twice with the following parameters:

Parameters and Visualization of the second dipole chaff

Parameters and Visualization of the third dipole chaff

Step 5

Select “Simulation → Parameters”, select a frequency sweep from 2 GHz to 6 GHz with 17 samples as shown in the figure and press the “Save” button.

Simulation parameters

Step 6

Select “Solver → Parameters”, leave the default parameters and press the “Save” button.

Solver → Parameters Menu option

 

Solver parameters

Step 7

Select “RCS → Parameters”. Select “Monostatic RCS” with the default parameters.

RCS → Parameters Menu option

RCS parameters

Step 8

Select “Output → Observation Directions” and introduce the far field observations as in the next Figure. Press the “Save” button. 

Output → Observation Directions Menu option

Far Field Observation Directions

Step 9

Select “Meshing → Create Mesh”.

Meshing → Create Mesh Menu option

Step 10

Select 10 divisions in both planar and curved surfaces and the default frequency value. One processor should be enough for the meshing process. Press the “Mesh” button.

Meshing parameters

Step 11

Select “Calculate → Execute”, choose the number of processor used to run the simulation and press the “Execute” button.

Selection of number of processors

Step 12

When the simulation has finished (i.e. the text in the progress bar in the bottom-right corner of the window is “Done.”) we can see the results. Select “Show Results → Far Field → View Cuts” to show the RCS graphic. The user can add more plots by selecting the desired frequency and pressing the “Add Series” button:

RCS graphic

Step 13

Select “Show Results → Far Field → View Cuts ByFrequency” to visualize the relationship of the RCS values and the frequency:

RCS-Frequency graphic

Step 14

Select “Show Results → Far Field → View Text Files”.

Show Results → Far Field → View Text Files menu option

Select one of the frequencies and press the “OK” button.

Far Field Text File panel

 

Visualizing results in text format

 

Selecting Monostatic RCS-Frequency files

Visualizing Monostatic RCS-Frequency text file

We use cookies on this website to improve your navigation experience on this site. By using this site, you agree to our cookie policy.

I agree