GTD 6.2.10

14.3. Example 3: Radiation Pattern File Simulation

In this section, we show how to compute the Near Field using a simple geometry fed by a customized DIA (radiation features definition) file.

Step 1. Create a newFASANT  GTD project by selecting the File → New option (or alternatively pressing Ctrl+N) and click on the following icon in the panel:

 

GTD module icon

 

Step 2. To create a new radiation pattern file (.dia), select the Tools –> DIA Files option.

 

DIA Files option

 

Step 3. Introduce the following parameters in the DIA Files Editor. The formula shown in the first figure has been used to fill the Etheta(dB) column, and the formula is shown in the second figure has been used to fill the Ephi(dB) column.

 

DIA Files Editor

 

DIA Files Editor

 

Step 4. Click on the Save button to save the DIA file.

 

Step 5. Now create the geometry for the simulation. Let’s generate a cylinder using the following command:

 

Created cylinder

 

Step 6. Now set up the parameters of the simulation. Select Simulation Parameters → Simulation. Enter the following parameters:

  • Near Field simulation type.
  • Initial frequency: 3.0 GHz. Disable Frequency Sweep.
  • Enable diffraction.
  • Keep the number of bounces equal to 1.

 

Simulation parameters

 

Step 7. Antenna -> Pattern File Antenna -> Import DIA File

 

Import DIA file

 

Step 8. Antenna -> Pattern File Antenna -> Pattern File Antenna

 

Pattern File parameters

 

Step 9. Now add a line of observation points. Select the Output → Observation Points option. In the Geometry Types combo box, select Line and press the Add button. The following dialog will pop up. Set the line parameters as shown in the figure.

 

Observation line parameters

 

Step 10. Select Meshing → Create Visibility Matrix to mesh. Select the number of processors to use for the meshing process and press the Mesh button.

 

Selecting the number of processors for the meshing

 

Step 11. Once the meshing process has finished, run the simulation. To do this, select Calculate → Execute, select the number of processors to use (like we did before meshing) and press the Execute button.

Step 12. When the calculation has finished, press Show Results → View Ray. On the left side of the Ray Visualization panel, select Step 2. The result should be the same as in the following figure:

 

Ray visualization

 

Step 13. It is possible to select a ray to show its information. Clicking in one of the rays will fill its information in the bottom of the panel.

 

Information of a selected ray

 

Step 14. To visualize the angular cuts, click on Show Results → Near Field → View Cuts

 

 View cuts

We use cookies on this website to improve your navigation experience on this site. By using this site, you agree to our cookie policy.

I agree