MOM 6.3

12.3. View Currents

This option allows to visualize the induced currents on the geometry, classified by parametric and frequency steps. Click on Show Results - View Currents to open the window shown in next figure:


Currents density diagram

The results represented in the figure above are corresponding to the MOM - Example 10.

The following elements are available within this panel:

  • Left color legend: it shows the magnitude and range of values of the represented Current Density.
  • Step and Frequency: to select the results from the available files to plot the currents.
    • Step: specify the parametric step when a parametric simulation has been run.
    • Frequency: specify the desired frequency.
  • Magnitude: The Current Density may be represented in natural or dBs magnitudes.
    • dB: The current density is represeneted in logarithmic scale, given in dB-Amperes per meter.
    • nat: The current density is represeneted in natural scale, given in Amperes per meter.
  • Field Component: To specify the component of the current density to plot. Only one component may be selected:
    • X: Plot the X component of current density.
    • Y: Plot the Y component of current density.
    • Z: Plot the Z component of current density.
    • Total: Plot the total current density, which is the combination of the X, Y and Z components.
  • Filtering Range: Use this section to skip results that are outside the desired range.
    • Enable Filtering: The filter only is applied when this check box is selected.
    • Max: To specify the maximum value of the range.
    • Min: To specify the minimum value of the range.
    • Filter: Click on this button to update the results filtering.
  • Bottom Options: Below the currents diagram, the following options are included:
    • Options: Disable this option to hide the left menu and visualize just the currents distribution.
    • Show Axis: Enable this option to show the coordinate axes.
    • Show Geometry: Enable this option to visualize the meshed geometry together the current density.
    • Antenna Results: Enable this option to visualize the antenna currents or disable it to hide them. It is only available when a radome has been analyzed.
    • Save as: To export the current representation as an image file.

We use cookies on this website to improve your navigation experience on this site. By using this site, you agree to our cookie policy.

I agree