You are reading an old version of this user guide. The information contained here has been archived and is presented for reference reasons, but it may not be up to date.

15.3. Example 3

This example shows the dynamic monostatic RCS of two cubes.

Step 1

Create a new newFASANT project (using the MONCROS module) following the steps 1 to 3 in the first example (Example 1).

Step 2

Select Geometry → Paramters Define parameters and introduce the following paramters.


Define parameters panel


Step 3

Select Geometry → Solid → Box to define the box paramters as follows:

Box parameters


Step 4

Repeat Step 3 to define another box.

Box parameters

Geometry composed of two boxes

Step 5

In the Simulation panel select a frequency of 0.3 GHz (default options) and press Save.

Simulation panel

Step 6

Select the Solver → Parameters option and choose CFIE solution

Solver panel

Step 7

Select the RCS → Parameters option. Select Monostatic RCS and leave the default parameters. Press the Save button.

RCS panel

Step 8

Select Output → Observation directions. Leave the default observation directions (0.0 phi cut with theta angle varying between 0.0 and 180.0 using 181 samples).

Observation directions panel


Step 9

Before running the simulation, select the Meshing → Create Mesh option. Set 10 divisions on planar and curved surfaces, set Processors to 2 and the default number of bands per octave. Press the Mesh button.


Step 10

Select Calculate → Execute and set the number of desired processors to run the simulation. Press the Execute button to start the calculation.



Step 11

Select Show Results → Far Field → View Cuts to visualize the far field values for the first step.


Far Field results


Step 12

Add a new series selecting the step on the combo box and click on Add Series button.

Far Field results


Step 13

Select Show Results → Far Field → View Text Files to visualize the text file with the results of the simulation.

Text file result

We use cookies on this website to improve your navigation experience on this site. By using this site, you agree to our cookie policy.

I agree