This web page is also available on English. Your browser is configured to use English as the default locale. Would you like to view this page in English? • Yes pleaseNo, thanks

PO Multiple effects analysis

─ 2.2. Meshing Parameters

In the PO module, the mesh generation is a required step that is performed immediately before simulating. In the Meshing Parameters window, represented in  Figure 15, the following options are available.

For this case, it is interesting to use the Regular Meshing option, in order to obtain a regular mesh of the geometry. As the simulation frequency is high, a good mesh will be obtained with edge size = 2.0 lambda, as shown in Figure 13.

 

Figure 13: Meshing parameters.

Figure 14 shows the mesh obtained for each geometry, dihedral, trihedron and cavity, respectively.

Figure 14: Mesh for the dihedral, trihedron and cavity.
 

This example has been meshed in a personal computer by using 4 processors and requiring approximately 1.2 GB of RAM and 1 second to obtain a mesh of about 100 elements for the dihedral, 150 elements for the trihedron and 2250 elements for the cavity.

Usamos cookies en este sitio web para mejorar tu experiencia al navegar por esta página. Si continúas usando este sitio, aceptas nuestra política de cookies.

Aceptar